Setup instructions

1. Preparation of the surface

Make sure the surface you want to apply the decal to is clean, dry and smooth.

Clean the surface with a dry or damp cloth, depending on the material. Allow the surface to dry completely before applying the decal.

2. Unroll the decal and relax

Unroll the decal and lay it flat on the floor.

To help the decal "relax" in its stretched position, weigh down the corners with heavy objects. This will facilitate the subsequent application process.

3. Position the decal

Carefully plan where you want to apply the decal. Make sure you have enough space around the decal for it to adhere properly.

4. Apply the decal

Start the application in the lower right corner. Remove the protective film and press the corner onto the surface.

Slowly peel off the film while continuing to press the decal onto the surface and applying it evenly. Use your free hand to ensure a smooth application.

5. Press for better grip

The decal will adhere better if pressed firmly. Press firmly to secure the decal in place.

If you want to reposition the decal later, avoid pressing too hard to make removal easier later.

6. Remove decal

To remove the decal, slowly and carefully peel it off the surface at a 45 degree angle.

For safer removal, you can also use a hairdryer to release the decal with warm air while carefully peeling off the edges. Work slowly to avoid damage.

7. Clean after removal

If any adhesive residue remains, gently clean it with a mild cleaning solution and a soft cloth.

8. Storage for future use:

After removal, cover the sticky side of the decal with the included protective film.

Roll up the decal again and store it in the original packaging to protect it from dirt and prepare it for later use.

Important instructions

Make sure the intended area is large enough for the decal.

Avoid removing and reapplying the decal multiple times, as this may weaken the adhesive.

The adhesive is strong and therefore not suitable for delicate surfaces or materials. It may cause damage upon removal. Avoid using it on wallpaper.

Friendly reminder:

Before giving the toy to your child, remove and dispose of all packaging materials that are not part of the toy. Keep these materials out of reach of children. Check the toy regularly for signs of wear or damage. If anything is damaged, do not use the toy and ensure it remains out of reach of children.